Teflon-coated tanks for chemical waste storage Aboveground tank, vertical, single-skinned, made of P265GHsteel Volume: 16 m3, diameter 2000 mm Medium: chemical sewage Norm: AD2000 Working pressure: 5 bar Operating temperature: +5°C/+140°C Tank is teflon-coated inside (360°), so a wide range of very abrasive media can be stored.
Archives
CGH Group had the pleasure of delivering 48 tanks to the USA The single-walled above-ground tanks have a capacity of 50 m³ Two of them underwent glazing – a treatment dedicated to a smooth and uniform surface
For this project CGH Nordic delivered 1 pc. 75 m³ double skinned aboveground tank in 4 compartments for 4 different grades of fuel. The room of 10 m³ for Adblue is equipped with 100 mm insulation and stainless steel cover plate. Filling pipes and suction pipes for Adblue are also... View Article
Underground, horizontal, double-walled tank made of S235 steel Capacity 200 m³ Diameter: 3400 mm Medium: gasoline Norm: AD2000 Working pressure: atmospheric Working temperature: -20 ° C / + 50 ° Tanks equipped with two special sumps measuring 3500x1400mm and 4500x1400mm with extensions.
CGH Nordic A/S has delivered 3 x 50 m³ tanks to Gardemoen Airport in Oslo, Norway. The tanks are intended for storage of defrosting liquid, so-called “Deicer”, which is sprayed on the aircraft before take-off in winter time. The tanks are single-skinned and made of stainless steel, they have 200mm... View Article
Double-skinned aboveground fuel station for aviation fuel containing Jet A-1. The tank is equipped with galvanized stairs for a large service platform on top of the tank. The tank is also equipped with a square pump house. 30 m³ double-skinned tank made according to EN12285-2 class A, ø 2500 mm.... View Article
The tank is manufactured for a industrial plant. To keep the oil flowing, heating and insulation are required. For heating half pipe is used. The tank is in diameter ø 3400mm. The tank is equipped with a heat jacket, half pipe and insulation. Media in tank: lubricating oil. Below you... View Article
CGH Nordic A/S produces and delivers tank parks, these can be complete with walkways with handrails, ladders, ladders with platform and backrest as well as stairs. This project consists of 48 tanks ranging in size from 15 m³ to 60 m³.
CGH Nordic A/S has build a “Easy Build” tanksolution for one of our good customers in Norway. The idea of this concept is to deliver a tanksolution where there is minimal work to be done on the construction site. This project included from CGH: 1 x 70m³ double skinned steel... View Article
CGH Nordic has sold and delivered 2 insulated single skinned 100m³ tank in Ø2900mm for bio oil. The tanks has 200mm insulation and are heated to 75°C by 3 electric heating element, the oil is used for a heater to heat bitumen. End customer is two bitumen plants, one situated... View Article
For an industrial production in southern Italy we have delivered a 60m³ SNCR tank, PED approved and calculated for earthquake zone. The tank is made of stainless steel. The tank is for 25% ammonia water. The tank is PED approved for pressure.
For the same project, three 50 m³ tanks for paraffin and stearic acid were previously delivered . The new tank is a 49 m³ melting tank for paraffin. The paraffin can now be purchased in blocks and melted on site. Along with the melting tank, a robot is installed which... View Article
For this project we sold three 50 m³ tanks for paraffin and stearic acid. The tanks are used in candle manufacturing. The medium in the tanks must be stored at high temperature to be usable, and therefore the tanks are provided with approx. 150 meter heating hose at the bottom... View Article
For this project in Sortland, Northern Norway, 4 double-skinned aboveground tanks have been delivered for collection of waste oil, wastewater and other waste products. The tanks are equipped with self-regulating heating cables and 100 mm insulation completed with cover plate in seawater-resistant aluminum. The medium in the tanks may contain... View Article
Double skinned above-ground tank in 3 compartments for storage of two types of diesel and Adblue. The Adblue room is 10 m³ and is insulated with 100 mm insulation and has a stainless steel cover plate. Suction pipe and filling pipe for Adblue are also insulated. To prevent Adblue from... View Article
This project included delivery of 5 pcs. 100,000 liters double skinned underground tanks. The tanks are divided into 2 rooms for storage of 2 products in one tank. All 5 tanks are supplied with CGH anchoring with concrete beams and anchoring bands. Vacuum has been established in the double wall... View Article
This delivery includes two 20,000 liters above-ground tanks for fuel oil. The location is Ittoqqoortormiit in Greenland << Read more about our aboveground tanks
The project included four 100,000 liters double-skinned underground tanks for petrol and diesel. Due to the very special conditions in Greenland, the tanks are equipped with large sleds, so the tanks can be pulled to the location.
This project included excavation of existing 100 m³ tank for fuel, soil analysis, then replacement with a 50 m³ and a 100 m³ double-skinned underground tanks, connection and establishment of roadway filling space, etc.
This project included delivery of 3 25,000 liters vertical tanks. The tanks are provided internal with stainless steel coils for heating the contents of the tanks. Subsequently, the tank has been isolated and covered with protective plate. << Read more about our vertical tanks
The project included the delivery of two 80,000 liters double-skinned underground tanks and one 100,000 liters double-skinned underground tank. The three underground tanks are complete including anchoring system made of stainless steel. The project also included TCI sumps and street covers.
This delivery included three 100,000 liters double-skinned underground tanks for ethanol storage, complete anchoring system incl. anchor bands and concrete piles. The tanks are have stainless steel covers and stainless steel inner pipes. The tanks are 100% internal treated with an ethanol resistant epoxy product. The tanks were delivered in... View Article
The delivery has included a total of 6 double-skinned tanks, some underground and others for above ground. The pictures below shows a 5,000 liter double-skinned aboveground tank complete with platform including Piusi stand, roof over stand, anti-siphon valve, tank alarm/vent, leak monitoring system, filling pipe to service level and more.
Double-skinned aboveground fuel station type A split into two compartments for storage of two types of fuel. Extending the tank, a platform has been made with room for pumps and payment terminal as well as a half roof. 60 m³ double-skinned steel tank made in accordance with EN12285-2 class A.... View Article
For this project there is 2 doubleskinned underground tanks. The tanks are sent by ship from Aalborg, Denmark and at the destination in Greenland, the tanks are discharged into the water. 1 x 16 m³ tank manufactured according to EN12285-2. Diameter 2.000 mm. Length 5.700 mm. 1 x 35 m³ tank... View Article
This project includes a 25,000 liters double-skinned diesel tank built into a 40′ CSC approved shipping container. Although the tank is double-skinned, the local authorities in Svalbard have demanded extra security, and the tank is therefore placed in a large waste tray, which can contain the entire contents of the... View Article
For this project we manufactured a 50,000 liters tank for truck fuel. 50 m³ double-skinned aboveground tank Diameter 2,900 mm Half-roof extension to the tank Filling pipe ending at service level Ladder, railing and platform on top of the tank. The manways have anti-theft protection cups, which effectively protect all... View Article
This oil tank for Gränna in Sweden is for 50,000 liters and the tank is doubleskinned. The tank is equipped with filling pipe ended at service level and ladder/railing/platform on top of the tank. The tank is painted in matching color to the building beside. << Read more about our... View Article
Double-skinned Methanol tanks with stainless steel inner tank. For an industrial production in Esbjerg – Denmark, 2 x 100 m³ and 1 x 70 m³ double-skinned underground tanks have been delivered. The tanks are with stainless steel inner tank and with double wall in S235JR which is external treated with... View Article
30,000 liters LPG tank The tank is a steel tank with Endoprene coating for underground purpose. Diameter ø2500mm. CE marked to 15.6 bar. Delivered in Denmark. << Read more about our LPG tanks
For this project we have delivered a 30,000 liters container fuel station for petrol and diesel. The project was carried out in collaboration with local companies, and the container fuel station is incl. approved dispensers for resale, payment terminal, advertising sign etc.
The gas tank is made of steel and is installed underground. Diameter ø2900 mm Volume 97.5 m³ Approved in accordance with PED2014/68/EU Working pressure 15.6 bar The tank comes with the necessary luminaire. CGH can offer gas tanks of 9.9 – 200 m³. << Read more about our LPG tanks... View Article
60,000 liters vertical diesel tank for Malmö Truck Center.
Complete fuel station for diesel, gasoline and Adblue. This fuel station is established in Ålgård, Norway. 70 m³ double-skinned underground tank made according to EN12285-1 class A. Diameter 2500 mm Length 14.800 mm. 4 rooms. 50 m³ double-skinned underground tank made according to EN12285-1 class A. Diameter 2500 mm Length... View Article
2 pcs. single skinned aboveground tanks for oil delivered in Greenland. The last part of the transportation in Greenland has been done by helicopter, and because of weight restrictions, the tanks are therefore made with loose saddles that are bolted to the tank afterwards. 2 x 10 m³ single skinned... View Article
Four 100 m³ double-skinned underground tanks for diesel and one 30 m³ double-skinned underground tank for Adblue. All 5 tanks are delivered with CGH anchoring system including concrete beams and anchoring bands. Vacuum has been established in the double wall of the tanks, and a pressure gauge with a built-in... View Article
Double-skinned aboveground fuel station type B for diesel/gasoline. The tank has 2 compartments for storing two types of fuel. Around the steel tank itself, a steel frame has been built, which is lined with sandwich panels. 30 m³ doubleskinned steel tank made in accordance with EN12285-2 class A. Divided into... View Article
For this project, 4 double skinned aboveground tanks for diesel/heating oil have been delivered. 4 x 100 m³ double skinned steel tanks made according to EN12285-2 class A. Diameter 2.900 mm. Length 15,900 mm. Internal treatment 100% with epoxy Eurokote 455 and external painted in corrosion class C3 – RAL... View Article
Double-skinned underground tank for ethanol complete with TCI access shaft model SM4533 and complete CGH anchoring system with concrete beams. The tank is delivered as type-approved K-tank in Sweden. 10 m³ double-skinned steel tank for underground made in accordance with EN12285-1 class A. Diameter 1,600 mm. Length 5,600 mm. Internal... View Article
Double-skinned aboveground fuel tank for diesel fuel. The tank is type-approved as K-tank in Sweden. 40 m³ double-skinned steel tank made according to EN12285-2 class A. Diameter 2,500 mm. Length 8,800 mm. Internal treated 100% with epoxy and external painted in corrosion class C3 in RAL 1003. The tank is... View Article
Doubleskinned diesel fuel/heating oil tank complete with TCI access shaft model SM4533 and galvanized street cover embedded in concrete. Vacuum has been established in the double wall of the tank and a pressure gauge with built-in alarm continuously monitors the density of the tank. 100 m³ doubleskinned steel tank made... View Article
Double skinned aboveground tank for diesel oil/fuel oil including waste tray under the entire tank for collecting waste in case of overfilling or failure during filling. The tank is equipped with SGB leak detection with vacuum that continuously monitors the double wall of the tank. 50 m³ double skinned steel... View Article